Cellulose Nanofiber-Alginate Biotemplated Cobalt Composite Multifunctional Aerogels for Energy Storage Electrodes.

Tunable porous composite materials to control metal and metal oxide functionalization, conductivity, pore structure, electrolyte mass transport, mechanical strength, specific surface area, and magneto-responsiveness are critical for a broad range of energy storage, catalysis, and sensing applications. Biotemplated transition metal composite aerogels present a materials approach to address this need. To demonstrate a solution-based synthesis method to develop cobalt and cobalt oxide aerogels for high surface area multifunctional energy storage electrodes, carboxymethyl cellulose nanofibers (CNF) and alginate biopolymers were mixed to form hydrogels to serve as biotemplates for cobalt nanoparticle formation via the chemical reduction of cobalt salt solutions. The CNF-alginate mixture forms a physically entangled, interpenetrating hydrogel, combining the properties of both biopolymers for monolith shape and pore size control and abundant carboxyl groups that bind metal ions to facilitate biotemplating. The CNF-alginate hydrogels were equilibrated in CaCl2 and CoCl2 salt solutions for hydrogel ionic crosslinking and the prepositioning of transition metal ions, respectively. The salt equilibrated hydrogels were chemically reduced with NaBH4, rinsed, solvent exchanged in ethanol, and supercritically dried with CO2 to form aerogels with a specific surface area of 228 m2/g. The resulting aerogels were pyrolyzed in N2 gas and thermally annealed in air to form Co and Co3O4 porous composite electrodes, respectively. The multifunctional composite aerogel's mechanical, magnetic, and electrochemical functionality was characterized. The coercivity and specific magnetic saturation of the pyrolyzed aerogels were 312 Oe and 114 emu/gCo, respectively. The elastic moduli of the supercritically dried, pyrolyzed, and thermally oxidized aerogels were 0.58, 1.1, and 14.3 MPa, respectively. The electrochemical testing of the pyrolyzed and thermally oxidized aerogels in 1 M KOH resulted in specific capacitances of 650 F/g and 349 F/g, respectively. The rapidly synthesized, low-cost, hydrogel-based synthesis for tunable transition metal multifunctional composite aerogels is envisioned for a wide range of porous metal electrodes to address energy storage, catalysis, and sensing applications.

Exploring the Role of Surface States in Emissive Carbon Nanodots: Analysis at Single-Particle Level.

Fluorescent carbon nanodots (CDs) have been highlighted as promising semiconducting materials due to their outstanding chemical and optical properties. However, the intrinsic heterogeneity of CDs has impeded a clear understanding of the mechanisms behind their photophysical properties. In this study, as-prepared CDs are fractionated via chromatography to reduce their structural and chemical heterogeneity and analyzed through ensemble and single-particle spectroscopies. Many single particles reveal fluorescence intensity fluctuations between two or more discrete levels with bi-exponential decays. While the intrinsic τ1 components are uniform among single particles, the τ2 components from molecule-like emissions spans a wider range of lifetimes, reflecting the inhomogeneity of the surface states. Furthermore, it is concluded that the relative population and chemical states of surface functional groups in CDs have a significant impact on emissive states, brightness, blinking, stability, and lifetime distribution of photoluminescence.

Photoluminescence Enhancement, Blinking Suppression, and Improved Biexciton Quantum Yield of Single Quantum Dots in Zero Mode Waveguides.

The capability of quantum dots to generate both single and multiexcitons can be harnessed for a wide variety of applications, including those that require high optical gain. Here, we use time-correlated photoluminescence (PL) spectroscopy to demonstrate that the isolation of single CdSeTe/ZnS core-shell, nanocrystal quantum dots (QDs) in Zero Mode Waveguides (ZMWs) leads to a significant modification in PL intensity, blinking dynamics, and biexciton behavior. QDs in aluminum ZMWs (AlZMWs) exhibited a 15-fold increase in biexciton emission, indicating a preferential enhancement of the biexciton radiative decay rate as compared to the single exciton rate. The increase in biexciton behavior was accompanied by a decrease in blinking events due to a shortening in the dark state residence time. These results indicate that plasmon mediated enhanced decay rates of QDs in AlZMWs lead to substantial changes in the photophysical properties of single quantum dots, including an increase in biexciton behavior.

Bis-tridentate N-Heterocyclic Carbene Ru(II) Complexes are Promising New Agents for Photodynamic Therapy.

Ruthenium(II) complexes developed for photodynamic therapy (PDT) are almost exclusively tris-bidentate systems with C2 or D3 symmetry. This is due to the fact that this structural framework commonly produces long-lived excited states, which, in turn, allow for the generation of large amounts of singlet oxygen (1O2) and other reactive oxygen species. Complexes containing tridentate ligands would be advantageous for biological applications as they are generally achiral (D2d or C2v symmetry), which eliminates the possibility of multiple isomers which could exhibit potentially different interactions with chiral biological entities. However, Ru(II) complexes containing tridentate ligands are rarely studied as candidates for photobiological applications, such as PDT, since they almost exclusively exhibit low quantum yields and very short excited-state lifetimes and, thus, are not capable of generating sufficient 1O2 or engaging in electron transfer reactions. Here, we report a proof-of-concept approach to make bis-tridentate Ru(II) complexes useful for PDT applications by altering their photophysical properties through the inclusion of N-heterocyclic carbene (NHC) ligands. Three NHC and two terpyridine ligands were studied to evaluate the effects of structural and photophysical modulations of bis-substituted Ru(II) complexes. The NHC complexes were found to have superior excited-state lifetimes, 1O2 production, and photocytotoxicity. To the best of our knowledge, these complexes are the most potent light-activated bis-tridentate complexes reported.

Controlled synthesis and characterization of NaYF4:Yb/Er upconverting nanoparticles produced by laser ablation in liquid.

Upconverting nanoparticles (UCNPs) composed of NaYF4 and doped with photoactive Yb3+ and Er3+ (NaYF4:Yb/Er) are highly desirable for many biological applications, but obtaining stable dispersions of UCNPs is challenging. Traditional synthetic methods often use complicated synthetic steps, produce toxic side products, and require post modifications to make UCNPs more dispersible in aqueous solutions. In this study, we demonstrate that laser ablation in liquid (LAL) is a novel approach to synthesize water-dispersible and -stable UCNPs with advantages of particle-size tuning, in situ coating of UCNPs with capping agents, no use of toxic or high boiling point solvents, and short reaction times. NaYF4:Yb/Er UCNPs were produced through LAL of annealed targets using water as the liquid, and their compositions and properties were investigated at a laser fluence of 0.57 J cm-2-6.22 J cm-2 by direct capping with citric acid and ethylene glycol and by comparing with the UCNPs prepared from the traditional hydrothermal method. Low laser fluences produced polydisperse particles consisting of no photoactive species through a thermal evaporation mechanism, while high laser fluences generated UCNPs with more uniform morphologies and compositions similar to the target material by an explosive ejection mechanism. The inclusion of capping agents during LAL allowed for direct coating of the UCNP surface without the need of post modifications, and the concentrations of capping agents affected the UCNP photoluminescence lifetimes. As compared to the hydrothermal method, the LAL-prepared samples showed better size control and no degradation of the capping agents.

Halide exchange and surface modification of metal halide perovskite nanocrystals with alkyltrichlorosilanes.

Metal halide perovskite nanocrystals have recently emerged as promising materials for light emitting displays and lasing applications due to their narrow emission wavelengths, high photoluminescence quantum yields, and readily adjustable emission wavelengths. For these metal halide perovskite nanocrystals to be useful in commercial applications, their stability must be increased and the photoluminescence quantum yields of the iodide (red emitting) and chloride (blue emitting) containing derivatives must also be increased. The photoluminescence quantum yields of blue emitting CsPbCl3 nanoparticles lag behind those of green emitting CsPbBr3 nanoparticles, with maximum photoluminescence quantum yields of 1-10% previously reported for CsPbCl3 as compared to 80-100% for CsPbBr3. Herein, we show that alkyltrichlorosilanes (R-SiCl3) can be used as Cl-sources for rapid anion exchange with host CsPbBr3 nanocrystals. This anion exchange reaction is advantageous in that it can be performed at room temperature and results in highly dispersible nanoparticles coated with siloxane shells. CsPbCl3 nanoparticles produced through Cl-exchange with R-SiCl3 show significantly improved long-term stability and high photoluminescence quantum yields of up to 12%. These siloxane coated nanocrystals are even stable in the presence of water, whereas CsPbCl3 nanoparticles synthesized through other routes rapidly degrade in the presence of water.

Liquid-phase laser ablation synthesis of graphene quantum dots from carbon nano-onions: Comparison with chemical oxidation.

Graphene quantum dots (GQDs) have been synthesized reproducibly by chemical oxidation (CO) of carbon nano-onions (nCNOs) and a one-step pulsed laser ablation (LA) of nCNOs in deionized water. The photoluminescence (PL) spectra show that the LA-GQDs have blue shifted emission relative to the CO-GQDs which is attributed to the effects of both particle sizes and surface functional groups. The CO-GQDs have an average diameter of 4.1(8) nm and a thickness corresponding to two or three graphene layers, while the LA-GQDs have an average diameter of 1.8(6) nm and a thickness comparable to a single layer of graphene. The CO-GQDs favor the presence of carboxylic groups and have a higher fraction of sp2 carbons, while the LA-GQDs prefer the presence of hydroxyl groups and have a higher fraction of sp3 carbons. PL lifetime data suggests that surface functional groups are the main source of radiative deactivation and the sp2 carbon domains are mainly responsible for non-radiative decay. PL lifetimes are measured to be 7.9(6) ns for the emission from the carboxylic groups and 3.18(10) ns from the hydroxyl groups. Compared to CO, liquid-phase LA is a faster and cleaner one-step method for producing GQDs with fewer starting chemicals and byproducts.